1. Loosen the two adjusting bolts on both ends of the pressure wheel before starting the machine, and then start the motor to observe whether the rotation of the machine is the same as the logo
2. Take 10 kg of grass powder, 25 kg of fine soil and 3 kg of gasoline and mix them evenly. (Type 105 and 120 are halved) now tighten the two regulating screws of the press wheel (the gap between the press wheel fish template is 0.1-0.3mm), then start the machine, followed by feeding and grinding, grinding repeatedly for several times, until the template hole is smooth and all the material is discharged. After the shutdown, the residual material in the template hole can be opened with steel nails.
3. Stop feeding before shutting down the pellet machine. After the material processing in the bin is completed, add oil-containing material into the template hole to keep the hole lubricated so as to avoid blockage in the next use.
4, granule length, can adjust the discharge port above the cutter up