1. Stop Turning: Unplug the egg turner cables connecting the trays to the internal control panel.
2. Move to Hatcher: Remove the eggs from the roller dividers and place them flat onto the black/white safety hatching net grid.
3. Boost Humidity: Fill all remaining water channels to drive relative humidity up to 65% to 75%. High humidity softens the egg membranes so the chicks can zip through the shells smoothly.
4. Drop Temperature Slightly: Lower your temperature reading down to 37.5°C to prevent the working chicks from overheating
Egg Turning: The automated roller system is factory-preset to complete a rotation once every 2 hours. You can test the mechanism manually by pressing the designated roll test button (often marked as "+" or "RST") on your interface panel