Slump Test Kit

+1

Chapa Mpya

Hali

Other

Chapa

Nyingine

Aina

Anwani ya duka

Kiambu • Ruiru

New home bussiness center ruiru, next to kcb bank, 2nd flr rm 211

We R along thika road, ruiru town next to kcb bank or opposite equity bank ruiru and petanns driving

Closed

• Jumatatu - Jumapili, 08:00-19:30

Slump Test Procedure 1. Set Up the Cone Place the slump cone on a flat, rigid surface and ensure it is firmly held in place (using foot holds or by standing on the base). 2. Moisten the Equipment Lightly dampen the inside of the cone and the base plate to prevent concrete from sticking. 3. Fill the Cone Fill the cone with fresh concrete in three equal layers. 4. Compact the Concrete Tamp each layer using a standard tamping rod with about 25 strokes per layer, ensuring even compaction. 5. Top Off and Level Overfill slightly, then strike off excess concrete so the top is level with the cone. 6. Remove the Cone Lift the cone slowly and vertically in a steady motion without any sideways movement. 7. Measure Slump Measure the vertical drop from the original height of the cone to the highest point of

Onyesha anwani