Olar heating compatible
For installations of low hydraulic pressure
For salty, borehole and normal water
Circuit breaker: 40A
Wiring: 4mm2 (10AWG)
With an earth wire
Protection degree: IP24
Circuit breaker: 30-32A
Water pressure for 3L/min flow; 10 kPa(0,1 bar)
Water inlet hydraulic connection: 1/2′′ NPT thread
Minimum water resistivity: 1.300Ω.cm at 15°C
Maximum water pressure supported: 400kPa (4 bar)
With a temperature selector
3 Temperatures
With a hose, hand shower, screw, shower holder, and an installation and usage manual