Power supply: vdd = 1.2v typical
vddq = 1.2v typical
vpp = 2.5v typical
vddspd = 2.2v to 3.6v
nominal and dynamic on-die termination (odt) for data, strobe, and mask signals
low-power auto self refresh (lpasr)
data bus inversion (dbi) for data bus
on-die vrefdq generation and calibration
single-rank
on-board i2 serial presence-detect (spd) eeprom
8 internal banks; 2 groups of 4 banks each
fixed burst chop (bc) of 4 and burst length (bl) of 8 via the mode register set (mrs)
selectable bc4 or bl8 on-the-fly (otf)
fly-by topology
terminated control command and address bus
pcb: height 1.23” (31.25mm)
rohs compliant and halogen-free